BLUETTI EB70 Portable Power Station | 1000W 716Wh
• 2 years Warranty
• 1000W AC Pure Sine Wave Inverter (1,400W Surge)
• 716Wh Capacity
• LiFePO4 Battery with 2,500+ Life Cycles to 80%
• 10 Outputs For Multiple Devices
• 4 Ways to Recharge (AC/Solar/Car/Generator)
• 200W Max. Solar Input
• Eco-friendly/Gas free/Quiet/Cost-effective
Pickup available at Unit 3/76 Porana Road
Usually ready in 24 hours
BLUETTI EB70 Portable Power Station | 1000W 716Wh
EB70 Portable Power Station | 1000W 716Wh
Unit 3/76 Porana Road
unit 3/76 Porana Road
Hillcrest
AUK
Auckland 0627
New Zealand
Free Shipping
2-Year Hassle-Free Warranty
After Sales Customer Support
Price Match Guarantee
Technical Specifications
Know the Technical Specifications of Bluetti EB70 Portable Power Station.
- Capacity: 716Wh (22.4V, 32Ah)
- Type: LiFePO4 (Lithium Iron Phosphate)
- Life Cycles: 2,500+ Cycles to 80% Original Capacity
- Shelf-life: Recharge to 80% Every 3-6 Months
- Management System: MPPT Controller, BMS, etc.
- AC Outlets: 2 x 220-240V AC Outlets, 1000W In Total
- Inverter Type: Pure Sine Wave
- Power: 1,400W
- USB-C Port: 2 x 100W Max.
- USB-A Port: 2 x 5V/3A 12V DC Outlets: 1 x 12V/10A (Car Outlet) | 2 x 12V/10A (DC5521)
- Wireless Charging Pad: 1 x 15W Max.
- AC Adapter Input: 200W Max.
- Solar Input: 200W Max. OCV 12-28V, 8A
- Car Input: 12/24V from Cigarette Lighter Port
- AC Adapter (200W): ≈4-4.5 Hours
- Solar (200W): ~4-4.5 Hours (With prime sunshine, ideal orientation and low temperature)
- 12V/24V Car Outlet (100W/200W): ~7.5 or 4.0 Hours
- Pass-through Charging: Yes
- Weight: 21.4lbs (9.7 kg)
- Dimensions (LxWxD): 12.6 x 8.5 x 8.7 in(32 x 21.6 x 22.1cm)
- Temperature: -4-104? (-20-40?)
- Storage Temperature:14-113? (-10-45?)
- Certifications: UKCA, CE, RCM, NTC, KC
- Warranty: 24 Months
Download the USER MANUAL HERE.
Stay Powered, Wherever Life Takes You
The EB70 portable power station packs the 1000W AC inverter and 716Wh LiFePO4 battery, great for outdoor adventure, camping, hiking, fishing, emergency and much more.
10 Outlets for All
Charge your devices as needed. BLUETTI EB70 is ready to charge your smartphones, tablets, lights, GoPros, refrigerators, coolers, projectors, etc.
Power for Play
Powering a mobile theater can't be easier. When camping or on a RV trip, bring EB70 and give kids a burst with excitement for a movie night.
Portability Brings Possibility
Weighing 21.4lbs with a size of 12.6×8.5×8.7inch, the EB70 is undoubtedly able to go with you to parks, forests, riverside, coastlines, or wherever else you need electricity.
9 Perfect Companion for Camping
FAQ
#1 How do I know whether my appliance can work well with the EB70?
Calculate the total wattage of your devices. EB70 should work if the load doesn't exceed its rated 1000W.
Friendly Note: For some devices with motor / compressor built inside, the instant start-up power may be 2-4 times more than the rated power, which may exceed the upper limit of the EB70.
#2 How long will EB70 power my device?
Working time (estimation) = 716Wh* 0.85 / operating power of your device. (0.85=Conversion Rate)
Please note that the actual working time may vary under different situations.
#3 Can I use third party solar panels?
PV input requirements for EB70:
1) Open Circuit Voltage (OCV) between 12V-28V; MAX input current: 8A; Input Power: 200W Max.
2) Equipped with MC4 Connector. If your panel has an Anderson connector, please purchase Anderson to MC4 cable, separately.You can click to buy Anderson to MC4 cable.
Best Companion:
1) 1*BLUETTI PV200 (200W), fully recharge from 0-100% ≈4hrs*.
2) 1*BLUETTI PV120 (120W), fully recharge from 0-100% ≈6.5hrs*.
Friendly Note: The actual charging time depends on the weather, solar condition, and the angle of the solar panels.
#4 an it charge and discharge simultaneously?
Yes, the EB70 supports pass-through charging; equipped with the premium LiFePO4 battery and the advanced Battery Management System, just feel free to use it the way that better suits your needs.
#5 How long can it run my device?
Running time = Battery capacity × DoD × η ÷ Device rated power
DoD refers to Depth of Discharge and η is local inverter efficiency.
For EB70, both DoD and η are 90%. If you run a 500W blender with it, the running time will be: 716Wh × 90% × 90% ÷ 500W ≈ 1.2hrs
Note:
1) The formula is NOT suitable for inductive loads with compressors, like refrigerator, air conditioner, etc.
2) The above data is for reference ONLY.
#6 What is the maximum input charging power of the BLUETTI EB70?
200W.
#7 Is the EB70 power station waterproof？
No. Also, please do NOT store it in a humid environment for a long time.
#8 Can I use or charge EB70 in sub-zero temperatures?
Temperature ranges for EB70S are:
Charge: 0-40℃ (32-104℉);
Discharge: -20-40℃ (-4-104℉);
Storage: -20-40℃ (-4-104℉).
Technically, it can power electrical devices under such situations, but please avoid charging it.
#9 Can it be laid on its side to save space?
No. Long-term placement will make the internal structure loose, it is recommended to place the machine upright.
#10 Does EB70 support BLUETTI App control?
Unfortunately, No.
#11 Can I expand its capacity by connecting with B230/B300 battery?
NO.
EB70 for Your Everyday Needs
Sustainable Living
